Fuel Temperature Sensor 1 Voltage High
The fuel temperature sensor is sending a voltage reading higher than expected.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The fuel temperature sensor measures how hot the fuel is. If it sends back a voltage signal that's too high, it tells the engine control module (ECM) there's an issue, likely too much heat or a faulty sensor.
What the computer is actually seeing
The ECM expects a voltage signal from the fuel temperature sensor between 0.5 to 4.5 volts. A voltage above 4.5 volts indicates a fault.
What a healthy reading looks like
Expected voltage from the fuel temperature sensor should be between 0.5V to 4.5V. Above this range indicates a fault.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect wiring and connections to the fuel temperature sensor. Look for frayed wires or corrosion. If any are found, repair or replace accordingly. Decision point: If wiring is intact, proceed to step 2, otherwise fix the wiring.
- 22. Using a multimeter, check the voltage at the fuel temperature sensor with the engine running. It should read between 0.5V and 4.5V. Decision point: If voltage is within range, suspect ECM issue. If above range, proceed to step 3.
- 33. Replace the fuel temperature sensor with a known good part and retest. Decision point: If the code returns, focus on ECM and wiring integrity. If code is cleared, the sensor was faulty.
Common causes
- Faulty fuel temperature sensor
- Wiring issues (short circuit)
- ECM software glitch
- Poor connector contacts
Typical repair cost
$$
Related codes
Frequently asked questions
Can I still drive the vehicle with this code?
Yes, it's drivable but fix soon due to potential fuel delivery issues.
Will this code come back after clearing it?
If the underlying issue isn't fixed, it will likely return.
Why is this code paired with other SPN codes?
They often relate to fuel system issues where multiple sensors may fail or react incorrectly.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →